NETWORK CONVERTER RS-232 TO TCP/IP - ROSSLARE MD-32

The MD-N32 SmartScapeTM Serial to Ethernet Gateway is a high-tech interface for data interfacing with a PC software interface used to connect RS232-based serial devices to a local area network (LAN) system that allows the serial device to send and receive digital data and messages from a computer or anther device in the LAN. ROSSLARE.

 

RS-232 CONNECTION COMMUNICATIONS DATA 

RS-232 Communications Method: 
RS-232 / RS-485 – Half Duplex D-9 Pin Type Connector TXD, RXD, RTS, CTS, DTR, DSR, GND RS-232 

Communications PORTS: 
1 RS-232 port (3.3V LVTTL) RS-232 

Serial Line Format: 
Serial line format 8-N-1, 8-O-1, 8-E-1, 7-O-1, 7-E-1 

Serial Flow Control: 
None, XON/XOFF, CTS/RTS RS-232 

Communications Data Rate: 
1200bps ~ 115Kbps 

Remote Firmware Upgrade Support: 
YES, MD-N32 Firmware can be updated from the Serial RS-232 Side, internal Bootstrap Loader and FLASH memory architecture. 

RS-485 Network Bus Distance (Max): 
1200 m Belden Shielded Pairs compatible if used with Rosslare’s MD-14** RS-232 to RS-485 converter R

ETHERNET CONNECTION COMMUNICATIONS DATA 

TCP/IP Remote LAN Support: 
YES, Supports Remote TCP/IP Subnet (OEM MD-N32) 

Ethernet Protocols: 
TCP, UDP, IP, ARP, ICMP, Ethernet MACRS-232 

Network Interface: 
10/100 Base-T Ethernet (Auto detection) RS-232 

Communications Data Rate: 
57,600 Bits Per Second 

Remote Firmware Upgrade Support: 
YES, MD-N32 Firmware can be updated from the TCP/IP Side, internal Bootstrap Loader and FLASH memory architecture. 

RS-485 Network Bus Distance (Max): 
1200 m Belden Shielded Pairs compatible if used with Rosslare’s MD-14 RS-232 to RS-485 converter